Formwork

Formwork for rammed earth must be solid and stable in order to resist the pressure and vibrations resulting from ramming.

3. Innovative technologies related to the increased utilization of low-energy building materials 1995

Formwork boards 25 mm thick squared timbers 120 mm x 100 mm round timbers of 150 mm diameter various wooden wedges nails of different sizes

Chapter 4 Peter Wehrmann 1993

Formwork boards squared timbers nails of different sizes

Chapter 7 Peter Wehrmann 1993

Formwork making guaranteeing the necessary strength but also considering aspects of economical use of material and easy formwork stripping calls for extensive specialized knowledge of the direction of forces when placing the concrete mix.

1. Purpose and Use of Formwork Peter Wehrmann 1993

Formwork boards squared timbers nails of different sizes tie wire

Chapter 6 Peter Wehrmann 1993

Figure 1 Formwork tieing in the subsoil by means of tie wires

2. Functional and Load Requirements of Formwork Peter Wehrmann 1993

Formwork boards - 25 mm thick nails - 40 mm and 70 mm long

Chapter 3 Peter Wehrmann 1993

Formwork boards square timbers nails of different sizes tie wire steel nails

Chapter 5 Peter Wehrmann 1993

Formwork walls and columns are to be backed up from all sides!

2. Functional and Load Requirements of Formwork Peter Wehrmann 1993

Formwork sheeting of individual boards normally consists of 25 mm thick and approximately 140 mm wide boards.

3. General Construction of Formwork Peter Wehrmann 1993