Definitions
from Wiktionary, Creative Commons Attribution/Share-Alike License.
- noun Alternative spelling of
case hardening .
Etymologies
Sorry, no etymologies found.
Support

Help support Wordnik (and make this page ad-free) by adopting the word case-hardening.
Examples
-
I'd learned enough about wootz, case-hardening, pattern-welding, tempering, and the rest to understand that this was high craftsmanship and to appreciate how much I didn't know.
Operation Luna Anderson, Poul, 1926- 1999
-
The case-hardening has been blown off at the top and about
Chapter 4 1990
-
Through case-hardening or deficient senses of humor they refrained from giggling while Sillery gave them a measured little speech of welcome about their sad duty and how we wished we could meet them under happier circumstances and so on.
The Space Merchants Pohl, Frederik 1952
-
The first, second, and fourth properties are clearly detrimental, while the third may possibly be an advantage in reducing checking and "case-hardening."
-
It is also evident that in addition to heat and a circulation of air, the air must be charged with a certain amount of moisture to prevent surface drying or case-hardening.
-
Bearing in mind that concentrated extracts of vegetable tannins in some circumstances effect a "dead" tannage (_cf_. case-hardening) and hence reduce their practical value, and that for this reason it is impossible to allow either concentrated extracts or concentrated Neradol
Synthetic Tannins Georg Grasser
-
There are many purposes for which a red heat is needed for slow continuous processes on a small scale, such as case-hardening small steel goods, annealing, heating light steel articles for hardening, and
Scientific American Supplement, No. 430, March 29, 1884 Various
-
The stock dried in five days showed slight case-hardening, so it was steamed at atmospheric pressure for 36 minutes near the close of the run, with the result that when dried off again the stresses were no longer present.
-
Care should be exercised that there is sufficient humidity in the receiving or loading end of the kiln, in order to guard against checking, case-hardening, etc.
-
The unequal shrinkage causes internal stresses in the wood as it dries, which results in warping, checking, case-hardening, and honeycombing.
Comments
Log in or sign up to get involved in the conversation. It's quick and easy.