fan1

First post Zalman CNPS9700 on a Gigabyte EP45-UD3R MB I have read many reviews with this combo, although the MB has a 4 pin CPU connecter, a 3 pin sys fan1 connector and a 3 pin pwr fan connector.

News Tom's Hardware US 2009

ALARM VBat: +2.98 V (min = +4.05 V, max = +3.06 V) ALARM fan1: 0 RPM (min = 2700 RPM, div = 2)

LinuxQuestions.org 2009

(Georgie may not have been behind it). soNZ fan1 at 5: 16AM on Dec 3rd 2009

Inside TV Blog 2009

Winbond W83791D properly handles higher fan divisors for fan1, fan2 and fan3 and shows fan4 and fan5 too added SMSC LPC47M192 FAN DIVISOR settings in CONFIGURE / ADVANCED added full PWM support to SMSC LPC47B397, including settings in CONFIGURE / ADVANCED CONFIGURE now allows to go as low as - 60C when selecting the DESIRED and WARNING levels to let users of the RELATIVE Intel Core temperature reading properly configure SpeedFan improved DDR2 memory module size detection added preliminary DDR3 identification fixed an issue where Intel Core temperatures on multi core systems reported the same temperature for all cores improved Tjunction detection for Intel CORE temperatures (you might no longer need the temperature offset in CONFIGURE / ADVANCED) fixed crash on several DFI motherboards fixed the detection of older revisions of the ITE IT8705F restored the correct clock speed after resume from hibernation rewritten the logic of the usage of a synchronizer in the thread that reads CPU usage (this will fix the SpeedFan not exiting issue) address $2E on DFI motherboards is no longer scanned if the motherboard model starts with LP.

xml's Blinklist.com 2008