Definitions

Sorry, no definitions found. Check out and contribute to the discussion of this word!

Etymologies

Sorry, no etymologies found.

Examples

  • To set the rolls proceed as follows: Loosen the nut on the bottom of the seaming-roll pin.

    Every Step in Canning

  • With a screw driver turn the seaming-roll pin counter clockwise -- that is, from right to left.

    Every Step in Canning

  • Continue turning the crank with the right hand, and with the left hand pull the seaming-roll lever until it will go no farther in this direction.

    Every Step in Canning

  • If seaming rolls cut into the can they are set too close, and the seaming-roll pin should be adjusted in the opposite direction from above.

    Every Step in Canning

  • Bring the seaming-roll lever back to the middle position and remove the can.

    Every Step in Canning

  • Continue to give the crank several turns after the seaming-roll lever has gone as far as it will go.

    Every Step in Canning

  • Push the seaming-roll lever gently and steadily, while turning the crank with the right hand.

    Every Step in Canning

  • Remove standard can base and in its place put in the reflanging base, lift the spring-pin and bring seaming-roll lever to the original position.

    Every Step in Canning

  • Turn the crank, rapidly at first, with the right hand, and at the same time push the seaming-roll lever very slowly with the left hand until it will go no farther.

    Every Step in Canning

  • Turn the crank and gently push seaming-roll handle from you until you come against cutting-roll stop, and the top of your can is cut off.

    Every Step in Canning

Comments

Log in or sign up to get involved in the conversation. It's quick and easy.