X-Y

Photovoltaic Imaging Software Suite with advanced image processing running on Windows XP Pro or Vista Business Hardware Options Reltron Motorized Camera Sensor Focus Motorized Reltron Camers Sensor X-Y Stage X-Y Hi Resolution Scanning Camera Mount with = >

Recently Uploaded Slideshows 2009

SKETCH lets you extrude a shape in the X-Y plane into the Z plane, and the Pocket parameter of SKETCH says that we will mill out a pocket.

Using GCAM for GCode 1 « The Half-Baked Maker 2010

Actually it is functionally quite close to single payer except that you get to take advance of the cost saving mechanism that comes from having people pay out of pocket (i.e. instead of paying $X in taxes and receiving “free” care, you pay Y out of pocket and $ (X-Y) in taxes).

Matthew Yglesias » Hayek on Health Care 2010

The LINE of the EXTRUSION indicates how deep the shape will be cut into the Z plane, while the LINEs of the SKETCH draw out the shape to extrude in the X-Y plane.

Using GCAM for GCode 1 « The Half-Baked Maker 2010

Read below about the BG X-Y tool from Specialized and the Juteau-Cantin X-Y measurement tool.

Technical FAQ with Lennard Zinn: Brake questions, compatibility and New Year’s feedback 2011

This would be the side resting against the bed of the X-Y table, while the other, longer side would hook into the vise to clamp it down.

Cut-off disk: 1, angle iron: 0 « The Half-Baked Maker 2010

Well, sir, as you know, urban expansion projects are typically limited to the X-Y plane, where the ambient rock temperature is between 70 and 80 degrees Fahrenheit.

365 tomorrows » 2010 » March : A New Free Flash Fiction SciFi Story Every Day 2010

Similarly, I add two more lines to complete my 1/4″ x 1/4″ square in the X-Y plane:

Using GCAM for GCode 1 « The Half-Baked Maker 2010

Well, sir, as you know, urban expansion projects are typically limited to the X-Y plane, where the ambient rock temperature is between 70 and 80 degrees Fahrenheit.

365 tomorrows » Patricia Stewart : A New Free Flash Fiction SciFi Story Every Day 2010

The AD line would start at some arbitrary point high up on the Y-axis, while the IL line would start at the X-Y intercept (zero liability, although that was never true).

Ahmed Moor: Obama's Abrogation of Responsibility 2010