ball-mill

(Harzer Wettersatz), air separators (pneumatic dry washer), tire pump, concussion (bumping) table bumping table, Chinese liberation pump (see fig.) possibly haulage by block and pulley, small ball-mill, small sizing drum, pedal fan, vibrating screen

19.1 Bicycle drive pedal drive 1993

When you ball-mill standard materials, it is important to mill each batch for the same amount of time.

8. Preparation of glazes 1993

A small air-swept ball-mill system can be selected in case moisture exists only for short periods in the rainy season.

6.1 System design 1993

A ball-mill working on a closed-circuit system is used for the grinding of the raw mix to the desired fineness of about 10 per cent retained on 170 mesh or 90 micron size sieve.

7.1 Plant flow-sheet 1993

Generally, the clay and coke-breeze components will have moisture, so it is preferable to use an air-swept ball-mill system with a drying compartment or a vertical roller mill.

6.1 System design 1993

· A rotary grate discharges the clinker, which is then interground with gypsum in a ball-mill.

Chapter 4 1988

These drop out of the kiln, are cooled and interground in a ball-mill with about 3 % gypsum to retard the setting of the cement.

Chapter 4 1988

Suitable clay deposits can be quarried, fired and ground into fine powder in a ball-mill, for use as a pozzolana.

Chapter 8 1985

Often, fly-lash occurs in a coarse form and will have to be pulverized before mixing with lime to produce a binder, so that the main capital item required in preparing fly-ash pozzolanas is a ball-mill for pulverizing the ash to the desired fineness.

Chapter 8 1985

Here, the only equipment required is a ball-mill or a hammer-mill to grind the material.

Chapter 8 1985