desolder

I don't have the skill to desolder chips from the board without ruining it.

TiVo Community 2010

I tried to rush and desolder-resolder the capacitors.

MAKE Magazine Keith Hammond 2010

[PIC] looks pretty normal for an HP TX1000 .. the heat will cause the ball grid array to desolder, and HP doesn't even acknowledge the problem.

reddit.com: what's new online! 2009

I am using a mesh desolder and I believe that the iron is not hot enough to melt the metal.

VideoHelp.com Forum 2009

I am using a mesh desolder and I believe that the iron is not hot enough to melt the metal.

VideoHelp.com Forum 2009

They dissected a mbp and proved that against the claims of nvidia a buggy graphic chip has been used - and that highly plausible to me (Quote: "buy a Macbook off the shelf, disassemble it, desolder the chips, saw them in half, encase them in lucite, and run them through a scanning electron microscope equipped with an X-ray microanalysis system")

Discussions: Message List - root 2009

But you don't have to desolder anything, the connector just slides of.

WordPress.com News Ian Lesnet 2008

This page details how to desolder the camera itself and build a standalone circuit for it so that it can be connected to an I2C bus, and subsequently a computer (i think, anyway - the schematics are in English, and there's a video). this page talks about how to connect the camera to an Arduino via some of I2C shield that he's built.

MAKE Magazine 2008

This page details how to desolder the camera itself and build a standalone circuit for it so that it can be connected to an I2C bus, and subsequently a computer (i think, anyway - the schematics are in English, and there's a video). this page talks about how to connect the camera to an Arduino via some of I2C shield that he's built.

Daily DIY 2008

If you do it properly (don't short anything on the card AND don't desolder anything else) you should atill be able to use the card.

WordPress.com News Ian Lesnet 2008