Definitions

from Wiktionary, Creative Commons Attribution/Share-Alike License

  • v. To solder again.

from The Century Dictionary and Cyclopedia

  • To solder or mend again; rejoin; make whole again.

Etymologies

re- +‎ solder (Wiktionary)

Examples

  • The pitch antenna of the Etherwave Signature broke loose on the drive home tonight when it shifted suddenly, so now I have a wire to resolder.

    Phasmatodea#7@Nightlight AAR

  • Got the Airport software downloaded to the older powerbook so I can move stuff over to it in order to send the newer one into Apple to fix the disk noise & resolder the headphone jack: the DSL I use at home has been down since Monday and I didn't want to download almost 9 Mb over a 56k dialup I keep as backup.

    catchup: vet, cancelled, dotbombfallout, Gaiman's smoke&mirrors, shopping, triLUG, pain

  • At Leamington, then, in September, 1841, he was finding a new life under the doctor's dieting, and new aims in life, which were eventually to resolder for a while the broken chain.

    The Life of John Ruskin

  • I tried to rush and desolder-resolder the capacitors.

    MAKE Magazine

  • Some of the iPod Nanos have a 2mm soldered wire leading from the board to the battery; it's beyond most people's capability to resolder that.

    "MAIN" via Steve in Google Reader

  • I asked if they were going to resolder the chip on the motherboard and he said that they will probably send out a new one.

    Discussions: Message List - root

  • The slightest bug in your read-only media would be exploited forever since you would have to resolder the chip to update.

    Microsoft Watch

  • Replacing the battery requires one to either replace the logic board as well as the battery or carefully remove and resolder the leads.

    EveryMac.com & EveryiPod.com - Mac & iPod Specs, Prices, Answers & More

  • If i would to take the metal ends off the ni-cad batteries and install 2 AA ni-hm and resolder the metal back to the ends of the batteries, would that work instead of replacing with ni-cad? which is better ni-cad or ni-hm?

    WordPress.com News

  • Though I had to resolder one of them they are fine as S-Video cables if you don't need digital output.

    xml's Blinklist.com

Wordnik is becoming a not-for-profit! Read our announcement here.

Comments

Log in or sign up to get involved in the conversation. It's quick and easy.